Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
  • String-wound design reduces fine sediment from a variety of fluids
  • Economically priced
CW and WP Series cartridges are manufactured from a durable polypropylene cord that is wound around a rigid polypropylene core. They are an economical solution to reduce fine sediment, including sand, silt, rust and scale particles.
Culligan® CW/WP Series Polypropylene Wound Cartridges
Unit of Measure
Items Culligan® CW/WP Series Polypropylene Wound Cartridges
CW-F
Culligan® CW Series 10 Nominal Micron Rating (µm) Polypropylene Wound Cartridge 		Culligan® CW/WP Series Polypropylene Wound Cartridges
CW-MF
Culligan® CW Series 30 Nominal Micron Rating (µm) Polypropylene Wound Cartridge 		Culligan® CW/WP Series Polypropylene Wound Cartridges
CW-50
Culligan® CW Series 50 Nominal Micron Rating (µm) Polypropylene Wound Cartridge 		Culligan® CW/WP Series Polypropylene Wound Cartridges
WP-5
Culligan® WP Series 5 Nominal Micron Rating (µm) Polypropylene Wound Cartridge 		Culligan® CW/WP Series Polypropylene Wound Cartridges
WP-30
Culligan® WP Series 30 Nominal Micron Rating (µm) Polypropylene Wound Cartridge
Description N/A
  • String-wound design reduces fine sediment from a variety of fluids
  • Economically priced
CW and WP Series cartridges are manufactured from a durable polypropylene cord that is wound around a rigid polypropylene core. They are an economical solution to reduce fine sediment, including sand, silt, rust and scale particles.
Brands N/A Culligan® Pentair Pentek®
Maximum Dimensions N/A 2-1/4 x 9-7/8 in60 x 251 mm
Nominal Micron Rating N/A 10 µm N/A 30 µm N/A 50 µm N/A 5 µm N/A 30 µm
Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate N/A < 1 psi N/A < 1 psi N/A < 1 psi N/A < 2.5 psi N/A < 1.4 psi
Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate N/A < 0.07 bar N/A < 0.07 bar N/A < 0.07 bar N/A < 0.17 bar N/A < 0.17 bar
Filter Media Material N/A Polypropylene Fiber Cord
Core Material N/A Polypropylene
Temperature N/A 40 to 145 ºF4.4 to 62.8 ºC
Withstand Temperature N/A Up to 165 ºFUp to 73.9 ºC
Industry Standards/Certifications N/A International Organization for Standardization (ISO-9001) Registered
Additional Information N/A CW cartridges are very economical and wound in a standard pattern around the core. They are available in 10, 30 and 50-micron ratings.

WP Series cartridges are wound in a precise pattern around the core providing greater surface area. The result is higher dirt-loading capacity and greater efficiency than standard wound cartridges like the CW.

Both of these string-wound cartridge styles are capable of withstanding temperatures up to 165ºF (73.9ºC), and will accommodate flow rates between 7 and 10 GPM with minimal pressure drop.

CW and WP Series cartridges are suitable for a wide variety of sediment filtration applications, including municipal and well water as well as many industrial fluids.
Note N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.