• String-wound design reduces fine sediment from a variety of fluids
  • Economically priced
CW and WP Series cartridges are manufactured from a durable polypropylene cord that is wound around a rigid polypropylene core. They are an economical solution to reduce fine sediment, including sand, silt, rust and scale particles.
Unit of Measure

Specifications

Brands

N/A Culligan® Pentair Pentek®

Maximum Dimensions

N/A 2-1/4 x 9-7/8 in60 x 251 mm

Nominal Micron Rating

N/A 30 µm

Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate

N/A < 1 psi

Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate

N/A < 0.07 bar

Withstand Temperature

N/A Up to 165 ºFUp to 73.9 ºC

Industry Standards/Certifications

N/A International Organization for Standardization (ISO-9001) Registered

Materials of Construction

Filter Media Material

N/A Polypropylene Fiber Cord

Core Material

N/A Polypropylene

Temperature

N/A 40 to 145 ºF4.4 to 62.8 ºC

Additional Information

Additional Information

N/A CW cartridges are very economical and wound in a standard pattern around the core. They are available in 10, 30 and 50-micron ratings.

WP Series cartridges are wound in a precise pattern around the core providing greater surface area. The result is higher dirt-loading capacity and greater efficiency than standard wound cartridges like the CW.

Both of these string-wound cartridge styles are capable of withstanding temperatures up to 165ºF (73.9ºC), and will accommodate flow rates between 7 and 10 GPM with minimal pressure drop.

CW and WP Series cartridges are suitable for a wide variety of sediment filtration applications, including municipal and well water as well as many industrial fluids.

Note

Note

N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.