Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
Nearly 200 configurations of multi-tank softener and filter systems available to meet your water treatment needs.

Culligan® Commercial and Industrial Solutions is focused on providing a modular platform of water treatment systems designed to solve your unique water treatment concerns. Our Commercial Skid Series offers nearly 200 different duplex and triplex configurations of our top softener and filter models available with different piping material and flow configurations depending on your performance and budgetary needs. All tanks are shipped fastened onto the steel skid for safe and easy transportation. The plumbing and wiring harnesses are pre-assembled in the factory to keep the installation time and labor at the absolute minimum. Every system offers simple, single point field utility connections for inlets, outlets, drains and power supplies on the most compact space possible.
Unit of Measure

System Specifications

Brands

 N/A Culligan®

Type

 N/A Depth Filter

Duplex or Triplex System

 N/A Duplex Triplex

Pipe Size

 N/A 2 in50.8 mm
Normal Service Flow Rate1 N/A 23 gpm at 5 psi drop (121.1 lpm at 34.5 kPa drop)

Peak Service Flow Rate

 N/A 48 gpm at 9 psi drop (181.7 lpm at 62 kPa drop)

Note for Service Flow Rate

 N/A Service flow rates are based on: Normal (10 gpm/ft2 - 24 m3/h/m2) - Best quality effluent at specified flow.
Lowest pressure loss. Recommended for suspended solids loads up to and greather than 300 ppm.
Peak (15 gpm/ft² - 37 m³/h/m²) - Very good quality effluent at specified flow. Increased pressure loss. Recommended for suspended solids loads <300 ppm.

Backwash Flow

 N/A 45 gpm170.3 slpm

Note for Backwash Flow

 N/A Backwash flow rates are based on 12-14 gpm/ft3 (29-34 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature.
Media Quantity2 N/A 830 lb376 kg

Tank Size

 N/A 24 x 54 in610 x 1,372 mm

Note for Tank Size

 N/A Dimensions are diameter by tank height. Steel tank heights are shell height.

Skid Footprint for Duplex System

 N/A 78 x 27 in1,981 x 686 mm

Skid Footprint for Triplex System

 N/A 120 x 36 in3,048 x 915 mm

Inlet Pressure (Dynamic)

 N/A 30 to 100 psig210 to 690 kPa

Voltage

 N/A 120 V

Frequency

 N/A 50 Hz60 Hz

Feed Water Temperature

 N/A 40 to 120 ºF4 to 49 ºC

Maximum Turbidity

 N/A 5 NTU

Maximum Chlorine

 N/A 1.0 mg/L

Maximum Iron

 N/A 5.0 mg/L

Markets Served

Markets Served

 N/A Clinics Educational Facilities Energy and Power Food and Beverage Production Food Service/Restaurants Grocery Healthcare/Hospitals/Bio-Pharmaceutical Hospitality/Lodging Manufacturing Municipal Drinking Water Oil and Gas

Examples of Softener and Filter Applications

Examples of Softener and Filter Applications

 N/A
  • Food and Beverage - Improved Taste and increased cost savings (S)
  • Drinking Water - Reduces turbidity and chlorine; improves taste and clarity (F)
  • Boilers - Reduction of turbidity and sludge blowdown (F)
  • Educational facilities - Boiler and cooling tower make-up water for scale reduction and improved energy costs (S)
  • Restaurants - For dishwashing, cleaning material savings, scale reduction (S)
  • RO Softener / DI Pretreatment (S & F)
  • Car washes - Improved rinsing results, detergent and water heating savings, scale reduction (S & F)
  • Apartment buildings, assisted living facilities and hotels - Quality water for laundry, dishwashers, boilers (S)
  • Grocery / Retail - Quality water for aesthetics and to help extend equipment life (S & F)
  • Light industry - For process and make-up water, boiler and cooling system pretreatment, general housekeeping (S). Reduction of particulate matter (F)
  • Office buildings - For heating plant pretreatment, tenant convenience, general housekeeping (S)

Culligan® Side Mount (CSM™) Skid System Standard Features

Culligan® Side Mount (CSM™) Skid System Standard Features

 N/A
  • Corrosion resistant, steel tanks (non-ASME) with epoxy interior lining and a finish coat painted exterior
  • All Softener systems include flow meters
  • Culligan®'s smart controller (GBE) and communication cables are included to provide programming and monitoring capabilities typically found in more expensive PLC controls
  • Bagged media included
  • Telemetric capabilities
  • Regeneration for filter systems are controlled by time clock on carbon filter systems and differential pressure switches on depth filter systems. Alternative meters (including Aqua-Sensor® kits) are available as an after-market item
  • Brine systems are sold separately
  • Culligan®'s Multiport Diaphragm Valves, designed for smooth operation, easy serviceability and to be free of water hammer
  • All softener models include one stainless steel flow meter per tank

Available Variations for Culligan® Side Mount (CSM™) Skid Systems

Available Variations for Culligan® Side Mount (CSM™) Skid Systems

 N/A
  • Duplex (2 tanks) or Triplex (3 tanks) systems for increased holding capacity and grain removal
  • All models are available with either Galvanized or PVC connecting (face piping) materials. The plumbing in and out of the tank through the control valve is always galvanized
  • Culligan®'s patented Progressive Flow technology is available as an upgrade for all Parallel Flow models with purchase of additional kits and flow meters
  • Alternating Flow is available for Duplex-configured softener models

Culligan® Commercial and Industrial Advantages

Culligan® Commercial and Industrial Advantages

 N/A
  • Simple System Integration
  • Global Product Platform
  • Flexible Configurations
  • Quick Delivery/Easy Installation
  • Exclusive Culligan® Advanced Electronics
    • Historical Operating Data
    • Alarm Recognitions
    • US Standard and Metric Readings
    • Remote Monitoring Options
    • Telemetry Options

Additional Information

Additional Information

 N/A Save yourself the uncertainty of quoting customized solutions piecemeal with non-Culligan® systems. Our Commercial Skid Series are sold as standard part numbers with competitive pricing and lead times. Contact Culligan® today to find the best skid solution for you.

Warranty

Warranty

 N/A Culligan®'s CSM™ water softeners and filters are backed by a limited 1-year warranty against defects in material, workmanship and corrosion. In addition, softener tanks are warranted for a period of 5 years.

Culligan® will provide a copy of the warranty upon request. Some localities have corrosive water. A softener cannot correct this condition, so its printed warranty disclaims liability for corrosion of plumbing lines, fixtures, or water-using equipment. If you suspect corrosion, your independently operated Culligan® dealer has equipment to help control the problem.

Note

Note

 N/A Operational maintenance and replacement requirements are essential for advertised performance. Specifications shown are for single models.

120 Volt/24 Volt CUL/UL listed Transformer Included.
  • 1 Service flow rates for taste, odor and organic removal are based on 5 gpm/ft2 (12 m3/hr/m2).
  • 2 Backwash flow rates are based on 10 gpm/ft3 (24 m3/hr/m2) using 50°F (10°C) water. A different backwash rate may be required depending upon water temperature or type of carbon used.