Culligan Reynolds H2O Plus - Culligan® ECP Series Pleated Cellulose Polyester Cartridges

Unit of Measure

Items	ECP1-10 Culligan® ECP Series 1 Nominal Micron Rating (µm) Tan End Cap Pleated Cellulose Polyester Cartridge	ECP5-10 Culligan® ECP Series 5 Nominal Micron Rating (µm) White End Cap Pleated Cellulose Polyester Cartridge	ECP20-10 Culligan® ECP Series 20 Nominal Micron Rating (µm) Blue End Cap Pleated Cellulose Polyester Cartridge	ECP50-10 Culligan® ECP Series 50 Nominal Micron Rating (µm) Yellow End Cap Pleated Cellulose Polyester Cartridge	ECP1-20 Culligan® ECP Series 1 Nominal Micron Rating (µm) Tan End Cap Pleated Cellulose Polyester Cartridge
Description	N/A Replaces CP and HFCP Series cartridges Special formulation of resin-impregnated cellulose and polyester fibers Provides higher wet strength than regular cellulose cartridges Minimal unloading and media migration
Brands	N/A Culligan® Pentair Pentek®
Standard 20 Inch (in) Cartridge Size	N/A 12 ft²
10 Inch (in) BB Cartridge Size	N/A 18 ft²
20 Inch (in) BB Cartridge Size	N/A 36 ft²
End Cap Color	N/A Tan	N/A White	N/A Blue	N/A Yellow	N/A Tan
Maximum Dimensions	N/A 2-5/8 x 9-3/4 in67 x 248 mm	N/A 2-5/8 x 9-3/4 in67 x 248 mm	N/A 2-5/8 x 9-3/4 in67 x 248 mm	N/A 2-5/8 x 9-3/4 in67 x 248 mm	N/A 2-5/8 x 20 in67 x 508 mm
Nominal Micron Rating	N/A 1 µm	N/A 5 µm	N/A 20 µm	N/A 50 µm	N/A 1 µm
Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate	N/A < 1 psi
Initial Pressure (ΔP) at 20 Gallons Per Minute (gpm) Flow Rate	N/A
Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate	N/A < 0.1 bar
Initial Pressure (ΔP) at 76 Liter Per Minute (L/min) Flow Rate	N/A
Filter Media Material	N/A Cellulose Polyester
Core Material	N/A Polypropylene
End Cap Material	N/A Vinyl Plastisol
Temperature	N/A 40 to 125 ºF4.4 to 51.7 ºC
Industry Standards/Certifications	N/A International Organization for Standardization (ISO-9001) Registered
Additional Information	N/A This unique blend of materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirtholding capacity, while maintaining extremely low pressure drop. The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unified end cap and gasket. ECP Series cartridge end caps feature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron), Blue (20-micron), Yellow (50- micron). The new ECP cartridges contain more media surface area than most competitive cartridges. The standard 10" ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet.
Note	N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.