Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
Nearly 200 configurations of multi-tank softener and filter systems available to meet your water treatment needs.

Culligan® Commercial and Industrial Solutions is focused on providing a modular platform of water treatment systems designed to solve your unique water treatment concerns. Our Commercial Skid Series offers nearly 200 different duplex and triplex configurations of our top softener and filter models available with different piping material and flow configurations depending on your performance and budgetary needs. All tanks are shipped fastened onto the steel skid for safe and easy transportation. The plumbing and wiring harnesses are pre-assembled in the factory to keep the installation time and labor at the absolute minimum.
Unit of Measure

System Specifications

Brands

 N/A Culligan®

Type

 N/A Softener

Inlet Pressure (Dynamic)

 N/A 20 to 125 psig135 to 860 kPa

Voltage

 N/A 120 V

Frequency

 N/A 50 Hz60 Hz

Feed Water Temperature

 N/A 33 to 120 ºF0 to 48 ºC

Maximum Turbidity

 N/A 5 NTU

Maximum Chlorine

 N/A 1.0 mg/L

Maximum Iron

 N/A 5.0 mg/L

Resin Quantity

 N/A 2 ft³56.6 L

Duplex or Triplex System

 N/A Duplex Triplex

Pipe Size

 N/A 1-1/2 in38 mm
Continuous Flow Rate1 N/A 25.1 gpm95.0 slpm
Peak Flow Rate2 N/A 31.5 gpm119.2 slpm

Note for Flow Rate

 N/A Flow rates shown are per tank.
Low flow channeling (flow rates less than 0.5 gpm/cubic foot of resin) may cause hardness leakage into effluent.

Tank Size

 N/A 14 x 47 in356 x 1,194 mm

Note for Tank Size

 N/A Dimensions are diameter by tank height. FRP tank height is measured flange to flange.
Flow rates shown are per tank.
Low flow channeling (flow rates less than 0.5 gpm/cubic foot of resin) may cause hardness leakage into effluent.

Skid Footprint for Duplex System

 N/A 18 x 40 in457 x 1,016 mm

Skid Footprint for Triplex System

 N/A 18 x 60 in457 x 1,524 mm

Markets Served

Markets Served

 N/A Clinics Educational Facilities Energy and Power Food and Beverage Production Food Service/Restaurants Grocery Healthcare/Hospitals/Bio-Pharmaceutical Hospitality/Lodging Manufacturing Municipal Drinking Water Oil and Gas

Examples of Softener and Filter Applications

Examples of Softener and Filter Applications

 N/A
  • Food and Beverage - Improved Taste and increased cost savings (S)
  • Drinking Water - Reduces turbidity and chlorine; improves taste and clarity (F)
  • Boilers - Reduction of turbidity and sludge blowdown (F)
  • Educational facilities - Boiler and cooling tower make-up water for scale reduction and improved energy costs (S)
  • Restaurants - For dishwashing, cleaning material savings, scale reduction (S)
  • RO Softener / DI Pretreatment (S & F)
  • Car washes - Improved rinsing results, detergent and water heating savings, scale reduction (S & F)
  • Apartment buildings, assisted living facilities and hotels - Quality water for laundry, dishwashers, boilers (S)
  • Grocery / Retail - Quality water for aesthetics and to help extend equipment life (S & F)
  • Light industry - For process and make-up water, boiler and cooling system pretreatment, general housekeeping (S). Reduction of particulate matter (F)
  • Office buildings - For heating plant pretreatment, tenant convenience, general housekeeping (S)

HE 1.5 System Features

HE 1.5 System Features

 N/A
  • Culligan®'s smart controller (GBE) and communication cables are included to provide programming and monitoring capabilities typically found in more expensive PLC controls
  • Carbon Filters - For reduction of organics (flow rates up to 12 gpm per tank) or chlorine (flow rates up to 24 gpm per tank)
  • Depth Filters - Flow rates up to 36 gpm per tank
  • Bagged media included
  • Corrosion resistant positive motor-driven regeneration valve- motor driven piston resists dirt, iron and turbidity
  • Corrosion resistant tanks - Made of fiberglass reinforced polyester
  • Under-drain design reduces pressure loss
  • Vacuum Breakers included on each tank
  • Telemetric Capability
  • Regeneration is controlled by time clocks. Alternative meters (including Aqua-Sensor® Kits) are available as an after-market item
  • Brine Systems are sold separately
  • UL / CUL Ratings

Available Variations for HE 1.5 Skid Systems

Available Variations for HE 1.5 Skid Systems

 N/A
  • Multiple Tank Configurations: Duplex (2 tanks) or Triplex (3 tanks) systems can increase the holding capacity of your systems in terms of grain removal and reducing organic and chlorine particles.
  • Culligan®'s patented Progressive Flow technology is installed on all HE 1.5 skid models. Simply re-program the GBE to change from Parallel Flow to the Progressive Flow configuration
  • Alternating Flow is available for all Duplex Softener Skid Systems

Culligan® Commercial and Industrial Advantages

Culligan® Commercial and Industrial Advantages

 N/A
  • Simple System Integration
  • Global Product Platform
  • Flexible Configurations
  • Quick Delivery/Easy Installation
  • Exclusive Culligan® Advanced Electronics
    • Historical Operating Data
    • Alarm Recognitions
    • US Standard and Metric Readings
    • Remote Monitoring Options
    • Telemetry Options

Additional Information

Additional Information

 N/A Every system offers simple, single point field utility connections for inlets, outlets, drains and power supplies on the most compact space possible.

Save yourself the uncertainty of quoting customized solutions piecemeal with non-Culligan® systems. Our Commercial Skid Series are sold as standard part numbers with competitive pricing and lead times. Contact Culligan® today to find the best skid solution for you.

Warranty

Warranty

 N/A Culligan®'s HE 1.5 water softeners and filters are backed by a limited 1-year warranty against defects in material, workmanship and corrosion. In addition, softener tanks are warranted for a period of 5 years.

Culligan® will provide a copy of the warranty upon request. Some localities have corrosive water. A softener cannot correct this condition, so its printed warranty disclaims liability for corrosion of plumbing lines, fixtures, or water-using equipment. If you suspect corrosion, your independently operated Culligan® dealer has equipment to help control the problem.

Note

Note

 N/A Operational maintenance and replacement requirements are essential for advertised performance. Specifications shown are for single models.

120 Volt/24 Volt CUL/UL listed Transformer Included.
  • 1 Flow rate at a 15 psi pressure loss.
  • 2 Flow rate at a 25 psi pressure loss.