Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
Durable High-Volume Water Filtration for Industrial Applications

The Culligan Hi-Flo® 50 Filter reduces contaminants (Contaminants may not necessarily be in your water.) and solids that affect equipment efficiency and water quality. Configure the system based on your requirements, adding tanks and instrumentation as your usage increases. Use the Culligan®-exclusive Smart Controller to easily manage and control your filtering options. Save time and effort with an automatic timer or sensors that reliably monitor your water usage and quality without constant supervision.

The Hi-Flo® 50 industrial water filter is part of the Culligan® Commercial and Industrial Solutions that combine durable and efficient equipment, systems experience, and technical experts who understand your unique requirements.
Unit of Measure

System Specifications

Brands

 N/A Culligan®

Inlet Pressure (Dynamic)

 N/A 30 to 100 psig210 to 690 kPa
Alternating Current (AC) Voltage1 N/A 24 V120 V

Frequency

 N/A 50 Hz60 Hz

Feed Water Temperature

 N/A 40 to 120 ºF4 to 49 ºC

Manganese and Iron (Oxidized or Soluble) Removal Service Flow Rate

 N/A 159 gpm at 5 psi drop (601.8 lpm at 34.5 kPa drop)

Note for Service Flow Rate

 N/A Service flow rates are based on 2" flow adapter and may be slightly lower when using the 1.5" flow adapter:
  • Normal (10 gpm/ft2 - 24 m3/hr/m2) - Best quality effluent at specified flow. Lowest pressure loss. Recommended for suspended solids loads up to 20 ppm.
  • Peak (15 gpm/ft2 - 37 m3/hr/m2) - Very good quality effluent at specified flow. Increased pressure loss. Recommended for suspended solids loads up to 10 ppm.

Backwash Flow

 N/A 239 gpm904.6 L/min

Note for Backwash Flow

 N/A Backwash flow rates are based on 12-14 gpm/ft2 (29-34 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature.

Pipe Size

 N/A 4 in101.6 mm

Note for Pipe Size

 N/A Depending on choice of 1.5" or 2" flow adapter.

Cullsorb Media Quantity

 N/A 32 ft³906 L

Note for Cullsorb Media Quantity

 N/A Systems designed with Greensand/Cullsorb B bed depth of 24" (610 mm).

Filter Tank Size

 N/A 54 x 60 in1,372 x 1,524 mm

Industry Standards/Certifications

 N/A Tested and Certified by WQA to NSF/ANSI 372
Hi-Flo® 50 Greensand/Cullsorb Filters are not tested or certified by WQA

Markets Served

Markets Served

 N/A Clinics Educational Facilities Energy and Power Food Service/Restaurants Food/Beverage Production Grocery Healthcare/Hospitals/Bio-Pharmaceutical Hospitality/Lodging Manufacturing Municipal Drinking Water Oil and Gas

Examples of Filter Applications

Examples of Filter Applications

 N/A
  • Pretreatment - For water softeners, reverse osmosis and deionization systems
  • Boilers - Turbidity reduction, reduce sludge blowdown
  • Drinking Water - Turbidity reduction, chlorine reduction, improves taste and clarity
  • Food and Beverage - Improved taste
  • Industrial Processes - Reduces particulate matter
  • Vehicle Wash - Turbidity reduction
  • Office buildings - For heating plant pretreatment, tenant convenience, general housekeeping

Standard Features

Standard Features

 N/A
  • Single or Multiple Tank Configurations
  • Culligan®'s Smart Controller - More control over your equipment with programming and monitoring capabilities typically found in more expensive PLC controls, a variety of add-on options for advanced instrumentation and communication let you easily customize the system to help meet your needs
  • Telemetric Capability
  • Regeneration initiation by choice or combination of time clock, meter or pressure differential switch
  • Carbon Filters - For reduction of organics (flow rates up to 98 gpm), or chlorine (flow rates up to 196 gpm)
  • Depth Filters - Flow rates up to 295 gpm
  • Side-Mounted Valve Harness - Guided perimeter designed diaphragm valves are smooth operating and free of water hammer, all valve parts are easily accessible in the design for ease of service
  • Corrosion resistant tanks - Made of low carbon steel with epoxy interior lining and finish coat painted exterior

Optional Features and Accessories

Optional Features and Accessories

 N/A
  • Skid Mounted - Fully pre-piped and wired systems for single point field utility connection of inlet, outlet, drain and power supply
  • Patented Progressive Flow - Culligan®'s Smart Controller can monitor flow demands bringing additional tanks on-line or offline as flows increase or decrease
  • ASME Code Tanks
  • Flow Measuring Devices - Available for volume based regeneration initiation
  • Differential Pressure Switch
  • Gauge Packages - Pressure gauges provided for mounting at the inlet and outlet connection
  • Remote Display
  • RS232, RS485, Modbus PLC Output

Culligan® Matrix Solutions Advantages

Culligan® Matrix Solutions Advantages

 N/A
  • Simple System Integration
  • Global Product Platform
  • Flexible Configurations
  • Quick Delivery/Easy Installation
  • Exclusive Culligan® Advanced Electronics
    • Historical Operating Data
    • Alarm Recognitions
    • US Standard and Metric Readings
    • Remote Monitoring Options
    • Telemetry Options

Warranty

Warranty

 N/A Culligan®'s Hi-Flo® 50 water filters are backed by a limited 1-year warranty against defects in material, workmanship and corrosion. In addition, filter tanks are warranted for a period of 5 years.

Culligan® will provide a copy of the warranty upon request.

Additional Information

Additional Information

 N/A From planning your system to installing your water treatment equipment, Culligan® Commercial and Industrial Solutions offer options that help deliver the quality of water to meet your needs. Your investment in treated water pays off when you work with the best equipment and people. Contact Culligan® today to discuss your water treatment options.

Note

Note

 N/A Each Family Group includes the following control valve options: Single downflow, Multi-tank downflow

Backwash flow rates are based on 10 gpm/ft2 (24 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature or the type of carbon used.

Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Specifications shown are for single models. Also available in multiple tank configurations. All pressure drop figures are based on new filter media and a water temperature of 60ºF. Depth filters are capable of 10 microns effluent water quality, whereas all other filter types are capable of 40 micron effluent water quality.
  • 1 120 Volt/24 Volt CUL/UL listed Transformer Included.