Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
High-Quality Filtered Water at your Fingertips.

The High Efficiency (HE) filter with patented technology delivers improved efficiency by reducing contaminants (Contaminants may not necessarily be in your water.) that affect equipment performance and durability. With the Culligan® Smart Controller, available on the HE, customers can set-up a single or multiple tank system that adjusts to flow demand. Customers can also monitor their water treatment system performance, consumable usage, and maintenance needs, at a single site or across multiple ones 24 hours a day.
Unit of Measure

System Specifications

Brands

 N/A Culligan®

Type

 N/A Carbon Filter
Pipe Size1 N/A 1-1/2 in38.1 mm

Maximum Operating Pressure

 N/A 20 to 125 psig135 to 860 kPa

Voltage

 N/A 24 V
Frequency2 N/A 50 Hz60 Hz

Feed Water Temperature

 N/A 33 to 120 ºF0 to 48 ºC

Power Consumption

 N/A 22 W
Vacuum3 N/A None

Taste Odor and Organic Removal Service Flow Rate

 N/A 12 gpm at 2 psi drop (45.4 lpm at 13.8 kPa drop)

Dechlorination Service Flow Rate

 N/A 24 gpm at 8 psi drop (90.8 lpm at 55.2 kPa drop)

Note for Dechlorination Service Flow Rate

 N/A Backwash flow rates are based on 12-14 gpm/ft2 (29-34 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature.

Note for Service Flow Rate

 N/A Service flow rates are based on 2" flow adapter and may be slightly lower when using the 1.5" flow adapter:
  • Normal (10 gpm/ft2 - 24 m3/hr/m2) - Best quality effluent at specified flow. Lowest pressure loss. Recommended for suspended solids loads up to 20 ppm.
  • Peak (15 gpm/ft2 - 37 m3/hr/m2) - Very good quality effluent at specified flow. Increased pressure loss. Recommended for suspended solids loads up to 10 ppm.
Backwash flow rates are based on 12-14 gpm/ft2 (29-34 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature.

Backwash Flow

 N/A 25 gpm94.6 slpm

Note for Backwash Flow

 N/A Service flow rates are based on 2" flow adapter and may be slightly lower when using the 1.5" flow adapter:
  • Taste, odor and organic removal are based on 5 gpm/ft2 (12 m3/hr/m2)
  • Dechlorination are based on 10 gpm/ft2 (24 m3/hr/m2)

Media Quantity

 N/A 6 ft³0.170 m³

Filter Tank Size

 N/A 21 x 62 in533 x 1,575 mm

Markets Served

Markets Served

 N/A Clinics Educational Facilities Energy and Power Food Service/Restaurants Food/Beverage Production Grocery Healthcare/Hospitals/Bio-Pharmaceutical Hospitality/Lodging Manufacturing Municipal Drinking Water Oil and Gas

Examples of Filter Applications

Examples of Filter Applications

 N/A
  • Food and Beverage - Improved taste and increased cost savings
  • Drinking Water - Reduces turbidity and chlorine; improves taste and clarity
  • Boilers - Turbidity reduction, reduce sludge blowdown
  • Light Industry Processes - Reduces particulate matter
  • Grocery/Retail - Quality water for aesthetics and help extend equipment life
  • Pretreatment - For softeners, RO's and DI systems
  • Vehicle Wash - Turbidity reduction

Standard Features

Standard Features

 N/A
  • Single or Multiple Tank Configurations
  • Culligan®'s Smart Controller - More control over your equipment with programming and monitoring capabilities typically found in more expensive PLC controls, a variety of add-on options for advanced instrumentation and communication let you easily customize the system to help meet your needs
  • Telemetric Capability
  • Regeneration initiation by choice or combination of time clock, flow meter or differential pressure switch
  • Corrosion Resistant Positive Motor-Driven Regeneration Valve - Motor driven piston resists dirt, iron and turbidity
  • Corrosion Resistant Tanks - Made from fiberglass reinforced polyester
  • Under-drain design reduces pressure loss
  • Flow meter
  • Electronic By-Pass - The filter can be by-passed electronically either from the unit or from the remote monitor and automatically goes back into service after a pre-set time.
  • Multi-Poppet Design - Allows for easy service and increases durability and valve life
  • Internally blocked Progressive Flow Systems
  • HE Carbon and Depth Filters are tested and certified by WQA against NSF/ANSI 372, CSA B483.1 and NSF/ANSI 61 for material requirements. Greensand filters do not have this certification
  • The Control Enclosure complies with UL 50/50E and UL 746C standards for a NEMA 3R Enclosure Rating

Optional Features and Accessories

Optional Features and Accessories

 N/A
  • Patented Progressive Flow - Culligan®'s Smart Controller can monitor flow demands bringing additional tanks on-line or offline as flows increase or decrease
  • Pressure Differential Switch
  • Bypass valve
  • Remote Display
  • RS232, RS485, Modbus PLC Output
  • Skid Mounted Systems

Culligan® Commercial and Industrial Advantages

Culligan® Commercial and Industrial Advantages

 N/A
  • Simple System Integration
  • Global Product Platform
  • Flexible Configurations
  • Quick Delivery/Easy Installation
  • Exclusive Culligan® Advanced Electronics
    • Historical Operating Data
    • Alarm Recognitions
    • US Standard and Metric Readings
    • Remote Monitoring Options
    • Telemetry Options

Warranty

Warranty

 N/A Culligan®'s HE filters are backed by a limited 1-year warranty against defects in materials, workmanship, and corrosion. The plastic conditioner tank has a 5-year warranty.

Culligan® will provide a copy of the warranty upon request.

Additional Information

Additional Information

 N/A The HE 1.5 filter is part of the Culligan® Commercial & Industrial Solutions that combine durable and efficient equipment, systems experience, and technical experts who understand your unique requirements. From planning your system to installing your water treatment equipment, Culligan® offer options that help deliver the quality of water to meet your needs. Contact Culligan® today to learn more about the HE filter system.

Note

Note

 N/A Each Family Group includes the following control valve options: Single downflow, Multi-tank downflow

Backwash flow rates are based on 10 gpm/ft2 (24 m3/hr/m2) using 50ºF (10ºC) water. A different backwash rate may be required depending upon water temperature or the type of carbon used.

Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Specifications shown are for single models. Also available in multiple tank configurations. All pressure drop figures are based on new filter media and a water temperature of 60ºF. Depth filters are capable of 10 microns effluent water quality, whereas all other filter types are capable of 40 micron effluent water quality.
  • 1 All Units
  • 2 120 Volt/24 Volt CUL/UL listed Transformer Included.
  • 3 Tank warranty is void if subject to vacuum.