Reynolds Culligan
Reynolds Culligan
1222 Greenleaf St.
Allentown, PA 18102
Phone: (855) 910-8430
Email: gdreynolds@yourwater.net
Webite: www.reynoldsculligan.com
8-4:30 M-F with 24 hour emergency service
Print Back
  • Manufactured from pure 100% polypropylene
  • Designed for purity and chemical compatibility
  • Spun fibers form a true gradient density from outer to inner surfaces
The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.

They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
Culligan® P Series Spun-bonded Polypropylene Cartridges
Unit of Measure
Items Culligan® P Series Spun-bonded Polypropylene Cartridges
P5-478
Culligan® P Series 2-3/8 x 4-7/8 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge 		Culligan® P Series Spun-bonded Polypropylene Cartridges
P1
Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge 		Culligan® P Series Spun-bonded Polypropylene Cartridges
P5
Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge 		Culligan® P Series Spun-bonded Polypropylene Cartridges
P25
Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge 		Culligan® P Series Spun-bonded Polypropylene Cartridges
P1-20
Culligan® P Series 2-3/8 x 20 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge
Description N/A
  • Manufactured from pure 100% polypropylene
  • Designed for purity and chemical compatibility
  • Spun fibers form a true gradient density from outer to inner surfaces
The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.

They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
Brands N/A Culligan® Pentair Pentek®
Maximum Dimensions N/A 2-3/8 x 4-7/8 in60 x 124 mm N/A 2-3/8 x 9-3/4 in60 x 248 mm N/A 2-3/8 x 9-3/4 in60 x 248 mm N/A 2-3/8 x 9-3/4 in60 x 248 mm N/A 2-3/8 x 20 in60 x 508 mm
Nominal Micron Rating1 N/A 5 µm N/A 1 µm N/A 5 µm N/A 25 µm N/A 1 µm
Initial Pressure (ΔP) at 2 Gallons Per Minute (gpm) Flow Rate N/A 0.3 psi N/A N/A N/A N/A
Initial Pressure (ΔP) at 5 Gallons Per Minute (gpm) Flow Rate N/A N/A 0.6 psi N/A 0.2 psi N/A 0.2 psi N/A
Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate N/A N/A N/A N/A N/A 0.6 psi
Initial Pressure (ΔP) at 7.6 Liter Per Minute (L/min) Flow Rate N/A < 0.1 bar N/A N/A N/A N/A
Initial Pressure (ΔP) at 19 Liter Per Minute (L/min) Flow Rate N/A N/A < 0.1 bar N/A < 0.1 bar N/A < 0.1 bar N/A
Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate N/A N/A N/A N/A N/A < 0.1 bar
Filter Media Material N/A Polypropylene Fibers
Temperature N/A 40 to 145 ºF4.4 to 62.8 ºC
Industry Standards/Certifications N/A International Organization for Standardization (ISO-9001) Registered N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only.

International Organization for Standardization (ISO-9001) Registered 		N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only.

International Organization for Standardization (ISO-9001) Registered 		N/A International Organization for Standardization (ISO-9001) Registered N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only.

International Organization for Standardization (ISO-9001) Registered
Additional Information N/A The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix.

P Series cartridges are available in a wide array of sizes and micron ratings to accommodate all of your filtration needs.
Note N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • 1 Based on manufacturer's internal testing.