Request Information
  • Manufactured from pure 100% polypropylene
  • Designed for purity and chemical compatibility
  • Spun fibers form a true gradient density from outer to inner surfaces
The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.

They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
Unit of Measure

Specifications

Brands

 N/A Culligan® Pentair Pentek®

Maximum Dimensions

 N/A 2-3/8 x 20 in60 x 508 mm
Nominal Micron Rating1 N/A 25 µm

Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate

 N/A 0.2 psi

Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate

 N/A < 0.1 bar

Industry Standards/Certifications

 N/A International Organization for Standardization (ISO-9001) Registered

Materials of Construction

Filter Media Material

 N/A Polypropylene Fibers

Temperature

 N/A 40 to 145 ºF4.4 to 62.8 ºC

Additional Information

Additional Information

 N/A The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix.

P Series cartridges are available in a wide array of sizes and micron ratings to accommodate all of your filtration needs.

Note

Note

 N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • 1 Based on manufacturer's internal testing.