• Pleated design maximizes dirt-holding capacity
  • Designed for general water filtration purposes
  • Recommended for chlorinated water supplies
  • Economically priced
Unit of Measure

Specifications

Brands

N/A Culligan® Pentair Pentek®

Maximum Dimensions

N/A 4-1/2 x 9-3/4 in114 x 248 mm

Nominal Micron Rating

N/A 20 µm

Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate

N/A 1.2 psi

Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate

N/A 0.08 bar

Surface Area

N/A 2070 in²1.34 m²

Recommended Flow Rate

N/A 20 gpm76 L/min

Industry Standards/Certifications

N/A International Organization for Standardization (ISO-9001) Registered

Materials of Construction

Filter Media

N/A Resin-Impregnated Cellulose

End Cap Material

N/A Vinyl Plastisol

Core Material

N/A Polypropylene

Netting Material

N/A Polyethylene

Temperature

N/A 40 to 145 ºF4.4 to 62.8 ºC

Additional Information

Additional Information

N/A S1 Series cartridges are manufactured from a pleated cellulose media and are designed for general water filtration purposes.

The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat in this fashion fuses the three components together forming a unified end cap and gasket.

An external netted sheath helps retain uniform pleat spacing in high flow and pulsating flow streams. The overlap seam is sonically welded to reduce bypass, improving filtration efficiency.

S1 Series cartridges are economically priced and highly effective at reducing sediment particles down to 20-microns in size.

Note

Note

N/A Use in 10" and 20" Big Blue® housings and BBFS systems only.

It is a registered trademark of Pentair Filtration, Inc.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.