- Replaces CP and HFCP Series cartridges
- Special formulation of resin-impregnated cellulose and polyester fibers
- Provides higher wet strength than regular cellulose cartridges
- Minimal unloading and media migration
Unit of Measure
Specifications
Brands |
N/A Culligan® Pentair Pentek® |
Standard 20 Inch (in) Cartridge Size |
N/A 12 ft² |
10 Inch (in) BB Cartridge Size |
N/A 18 ft² |
20 Inch (in) BB Cartridge Size |
N/A 36 ft² |
End Cap Color |
N/A Yellow |
Maximum Dimensions |
N/A 4-1/2 x 9-3/4 in114 x 248 mm |
Nominal Micron Rating |
N/A 50 µm |
Initial Pressure (ΔP) at 20 Gallons Per Minute (gpm) Flow Rate |
N/A < 1 psi |
Initial Pressure (ΔP) at 76 Liter Per Minute (L/min) Flow Rate |
N/A < 0.1 bar |
Industry Standards/Certifications |
N/A International Organization for Standardization (ISO-9001) Registered |
Materials of Construction
Filter Media Material |
N/A Cellulose Polyester |
Core Material |
N/A Polypropylene |
End Cap Material |
N/A Vinyl Plastisol |
Temperature |
N/A 40 to 125 ºF4.4 to 51.7 ºC |
Additional Information
Additional Information |
N/A
This unique blend of materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirtholding capacity, while maintaining extremely low pressure drop. The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unified end cap and gasket. ECP Series cartridge end caps feature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron), Blue (20-micron), Yellow (50- micron). The new ECP cartridges contain more media surface area than most competitive cartridges. The standard 10" ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet. |
