Culligan Reynolds H2O Plus - Culligan® P Series Spun-Bonded Polypropylene Cartridges

Manufactured from pure 100% polypropylene
Designed for purity and chemical compatibility
Spun fibers form a true gradient density from outer to inner surfaces

The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.

They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.

Request Information

Unit of Measure

Items	P5-478 Culligan® P Series 2-3/8 x 4-7/8 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge Request Quote	P1 Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge Request Quote	P5 Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge Request Quote	P25 Culligan® P Series 2-3/8 x 9-3/4 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge Request Quote	P1-20 Culligan® P Series 2-3/8 x 20 Inch (in) Maximum Dimensions Spun-bonded Polypropylene Cartridge Request Quote
Description	N/A Manufactured from pure 100% polypropylene Designed for purity and chemical compatibility Spun fibers form a true gradient density from outer to inner surfaces The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces. They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
Brands	N/A Culligan® Pentair Pentek®
Maximum Dimensions	N/A 2-3/8 x 4-7/8 in60 x 124 mm	N/A 2-3/8 x 9-3/4 in60 x 248 mm	N/A 2-3/8 x 9-3/4 in60 x 248 mm	N/A 2-3/8 x 9-3/4 in60 x 248 mm	N/A 2-3/8 x 20 in60 x 508 mm
Nominal Micron Rating¹	N/A 5 µm	N/A 1 µm	N/A 5 µm	N/A 25 µm	N/A 1 µm
Initial Pressure (ΔP) at 2 Gallons Per Minute (gpm) Flow Rate	N/A 0.3 psi	N/A	N/A	N/A	N/A
Initial Pressure (ΔP) at 5 Gallons Per Minute (gpm) Flow Rate	N/A	N/A 0.6 psi	N/A 0.2 psi	N/A 0.2 psi	N/A
Initial Pressure (ΔP) at 10 Gallons Per Minute (gpm) Flow Rate	N/A	N/A	N/A	N/A	N/A 0.6 psi
Initial Pressure (ΔP) at 7.6 Liter Per Minute (L/min) Flow Rate	N/A < 0.1 bar	N/A	N/A	N/A	N/A
Initial Pressure (ΔP) at 19 Liter Per Minute (L/min) Flow Rate	N/A	N/A < 0.1 bar	N/A < 0.1 bar	N/A < 0.1 bar	N/A
Initial Pressure (ΔP) at 38 Liter Per Minute (L/min) Flow Rate	N/A	N/A	N/A	N/A	N/A < 0.1 bar
Filter Media Material	N/A Polypropylene Fibers
Temperature	N/A 40 to 145 ºF4.4 to 62.8 ºC
Industry Standards/Certifications	N/A International Organization for Standardization (ISO-9001) Registered	N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only. International Organization for Standardization (ISO-9001) Registered	N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only. International Organization for Standardization (ISO-9001) Registered	N/A International Organization for Standardization (ISO-9001) Registered	N/A Tested and Certified by NSF® International to NSF®/ANSI Standard 42 for material requirements only. International Organization for Standardization (ISO-9001) Registered
Additional Information	N/A The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix. P Series cartridges are available in a wide array of sizes and micron ratings to accommodate all of your filtration needs.
Note	N/A WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
¹ Based on manufacturer's internal testing.